There are over 50 new SUVs, mini-vans, and hatchbacks that trunk racks won't fit due to possible spoiler damage...until now. Hollywood's Over-the-Top 2 bike rack carries 2 bikes and features an adjustable high rise frame which prevents strap contact with the spoiler. It includes removable hatch anchors and quick-connect straps for secure attachment to hatches, trunks, roof rack cross bars, and roof rack raised rails. In addition to fitting most vehicles without a spoiler, it also folds flat when not being used.
The HR1455Y-E is the Fat Tire electric bike version of the Sport Rider SE2 hitch rack. It will carry 2 electric bikes or standard bikes . Special features include extra heavy duty wheel holders for heavy load carrying capacity. The rack folds up when not in use, tilts down for easy cargo access and includes a keyed alike locking hitch pin and security cable. Features patented no wobble-no tools hitch tightening system. For 2" hitches only. Fits up to 5" wide tires.
Yakima's HitchSki is an attachment for your hitch-mounted rack (sold separately) that enables you to carry skis and snowboards. Simply swap the HitchSki for your bike attachment and you now have a rack that can be used year-round. It hauls up to six pairs of skis or four snowboards without the risk of damage thanks to rubber-padded arms. And, Yakima's SKS locks are included to prevent theft.
Light, strong, and always ready to roll, the SingleSpeed hitch rack is built for solo travel. Ready for any kind of bike – road, mountain, fat, or BMX – the StrongArm hook ensures your bike is secure and protected, holding the bike tight by the wheels, and babying those carbon frames and painted surfaces. The locking SpeedKnob makes install a breeze & an integrated SKS bike lock is included to keep your two wheeler secure. - Light, compact, and built for one bike, this hitch rack makes for quick & easy solo travel - Lightweight, hitch mounted tray rack that carries one bike without frame contact - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Tool-free locking SpeedKnob makes installation and removal fast, easy and secure - Folding wheel cup and compact design keeps the rack out of your way when not in use - Fits most bikes, including fat-tire, mountain, road, hybrid, women’s specific, & BMX - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20” to 29” wheel sizes and tires up to 5-inch wide - Integrated SKS (Same Key System) lock included for added bike security - Fits both 1.25-inch & 2-inch hitch receivers right out of the box
Choose your own adventure with the MTR 1-bike hitch rack. Whether you’re feeling me-time or party time, the MTR can adjust for any occasion. The secret is in the MTR’s modular design (after all, MTR stands for “Modular Tray Rack”). Simply add or remove trays to securely haul between one and three bikes to wherever the trail may lead. When you’re ready to hit the road, feel free to take the scenic route. Rugged enough to handle the harshest of environments, the MTR is built with American-made steel and aluminum. Complete with versatile and sleek nesting trays with dual-arm wheel holders, the MTR can carry nearly any rig – from Junior’s MTB to downhill to your favorite eBike – securely, in style and without ever coming into contact with your bike’s frame. The Saris MTR also available in a 2-Bike version. Product Features - Modular: carries 1 bike, up to 60 lbs, and can be customized with Add-On to transport up to three bikes. - Pivot Away: unique wheel trays pivot and nest for easy loading and compact storage. - Dual-arm holders are compatible with a wide range of tire sizes and never touch the bike's frame. - Full Tilt: tilting feature allows easy hatch access without removing bikes. - Complete Integrated Security: locks the rack to the car and the bikes to the rack. - Tray-style hitch bike rack. - Carries 1 bike, up to 60 lb. - Customizable to carry more bikes with 1-Bike Add-On and 2-Bike Add-On - No assembly needed. - Tool-free installation. - Rack weight: 35 lb - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches. - Easily folds up when not in use. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car. - Accommodates wheel bases up to 53 inches. - Universal hitch: fits 1 ¼” and 2” hitches out of the box. - Constructed from American-made aluminum and steel, and tested to outlive the elements.
RockyMounts employed components from their SplitRail to develop the MonoRail. The MonoRail carries two bikes with an option for a third bike (2-inch model only) for up to three-bike capacity. It holds everything from kids, road, mountain and fat bikes without missing a beat. - 39 lbs assembled weight - Simple 5 minute assembly - Fits bikes 20-inch to 29-inch wheels, road to fat bike tires 5-inch wide and 197mm rear spacing - 13-inch spacing between bikes and 3" side-to-side adjustment provides plenty of room between bikes - Handle located at end of rack for use, stowed and folded away positions - Max weight 60 lbs per bike, 120 lbs per rack - No bike frame contact, hook clamps front wheel - CRMO hitch tube is light weight and corrosion resistant - Included locks, bike to rack, rack to car with same key - Anti-wobble hitch pin keeps the rack solid and secure
This is a one bike add-on to turn your MonoRail 2-inch (sold separately) into a three bike carrier. Simply remove the end cap from the MonoRail, slide the attachment in and it quickly secures with two bolts. The cable lock included with the MonoRail is long enough to secure all three bikes. Simply and easy. Not compatible with 1.25-inch MonoRail.
This is perfect for the commuter or rider who only needs to carry one bike. It is light at 25lbs, compact, easy to store & easy to use. RockyMounts includes both 1.25" and 2" components in the box, so it will work with either hitch receiver sizes, as well as their anti-wobble locking hitch bolt to keep the rack both tight and secure. The rack includes locks for locking the rack to the car and the bike to the rack with the convenience of one key. It folds flat against the car with a quick release handle and the bike easily loads with our platform wheel trays and ratcheting arms. If you do need to carry a second bike down the road, RockyMounts' MonoRail Add-on can be installed by removing the end cap and attaching with two bolts. It is simple to go back and forth between 1 & 2 bike configurations. Carries kids bike with 20" wheels up to adult 29" wheels up to 48" wheelbase. Carries Fat Bikes up to 5" tires providing enough clearance for RockShox Blutos & the new 197mm rear axles.
The SplitRail LS goes beyond just a hitch rack with a balance between aesthetics and functionality that is best in class. The SplitRail design puts everything in the right place, while visually creating a clean rack that will not distract from your vehicle's good looks. The largest carrying capacity, up to 4 bikes with Add-Ons, and the deep wheel wells make the SplitRail LS incredibly secure and versatile. Integrated locks keep your bikes safe for those quick trips, while the soft-touch hook arms keep it looking good without frame contact. Product Features: - Carries 2 bikes, up to 60 lbs each - Expandable to 3 or 4 bikes up to 45 lbs each, with Add-Ons - Tire Width: 19mm road bike tires - 3.0-inch mountain bike tires - Wheel Diameter: 20-inch - 29-inch - Wheelbase: 34-inch - 50-inch - Only available for 2-inch hitches. Uses our premium 3-axis anti wobble system - Tray can be adjusted 4-inch side-to-side to avoid bike interference - No contact with frame, secures bicycle by front wheel - Folds flat against the vehicle, and tilts down 30 degrees to allow for hatch access - Only available for 2" hitches. Uses RockyMounts premium 3-axis anti wobble system - Integrated cable locks secure individual bikes to trays, locking hitch pin and premium lock pod secures rack to car, keyed alike - Includes wall hook for easy storage - Not for use with fender equipped bicycles - Rack weight 44 lbs (shipping weight 58 lbs)
The WestSlope is a wallet-friendly, feature-filled and clean platform hitch rack. The frame body is sloped to create a tiered mounting arrangement that eliminates handlebar interference between the bikes. By using a soft-touch wheel hook and a ratcheted swing arm, the WestSlope provides a secure fit with zero frame contact. - Carries 2 bikes, up to 40 lbs each - Tire Width: 19mm road bike tires - 3.0-inch mountain bike tires - Wheel Diameter: 20-inch - 29-inch - Wheelbase: 34-inch - 48-inch - Fits both 1.25-inch and 2-inch hitches with adapter sleeve & anti wobble bolt - Tiered mounting eliminates handlebar interference between bikes - No contact with frame, secures bicycle by front wheel - Folds flat against the vehicle, and tilts down 30 degrees to allow for hatch access - WestSlope Lock Kit sold separately
The WestSlope 3 is a wallet-friendly, feature-filled and clean platform hitch rack. The big brother to the WestSlope, just with the capacity for an extra bike. The frame body is sloped to create a tiered mounting arrangement that eliminates handlebar interference between the bikes. By using a soft-touch wheel hook and a ratcheted swing arm, the WestSlope provides a secure fit with zero frame contact. - Carries 3 bikes, up to 40 lbs each - Tiered mounting eliminates handlebar interference between bikes - No contact with frame, secures bicycle by front wheel - Carries road tires up to 3.0” wide mountain bike tires, and diameters from 20” to 29” - Compatible with bicycles’ wheelbases from 34” to 48” - Folds flat against the vehicle, and tilts down 30 degrees to allow for hatch access - Fits 2” hitches only, with anti wobble bolt - Not for use with fender-equipped bicycles - Rack weight 43 lbs (Shipping weight 47 lbs) - WestSlope Lock Kit sold separately
Kuat's Beta is a lean, mean rack that carries two bikes (up to 80 lbs. total capacity) and weighs in at just under 14 lbs. - Carries 2 bikes (up to 40 lbs. each) - Total carrying capacity of up to 80 lbs. - Folds up quickly for storage - Tilts down for easy vehicle access - Enhance the Beta with hitch lock system (sold separately) - Hand-tight cam system - no need for additional tools! - Anti-sway carriages for a smooth ride - Aluminum construction is lightweight and extremely durable - Gun Metal Gray powder coat finish - 2-inch weighs only 12 lbs. (lightest weight on the market) - 1.25-inch weighs only 14 lbs. (additional 2lbs due to steel lower end) - Available for 2-inch OR 1.25-inch receivers. The 1.25-inch Beta can fit either hitch size with the 1.25-inch to 2-inch adapter.
The Rack Valet is the first mobile bike rack storage and transportation system. Easily attach your bike rack into either the 1-1/4" or 2" slot on the rack valet and then roll it out to your vehicle. Some bike Racks can weight up to 90 pounds, so save yourself the trouble (and back pain) and roll your rack right out to your car.
Transport your recumbents and save your back, too, with Hollywood's Sport Rider Recumbent rack that carries up to 2 'bents. Simply set your recumbent into the wheel holders (that are nice and low for easy mounting), then slide the padded universal clamp over the frames to secure them in place. This great rack fits recumbents with up to 74-inch wheelbases and includes small wheel adapters and extra tie downs to keep your rig in place. And, the Sport Rider folds up when not in use for easy storage and transportation. - Hitch Size: fits both 1 ¼ and 2-inch - Space between bikes: 18-inches - Not to be used on any trailer, fifth wheel or towed vehicle - Max weight capacity: 45 lbs per bike
Page 1 of 1