Filter By:
- Parts & Accessories (73)
- CO2 Inflators (70)
- Floor Pumps (53)
- Frame Pumps (15)
- Mini Pumps (79)
- Shock Pumps (13)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Pumps/Inflation
$7.90
- Solution for mounting pumps and C02 inflators on frames or seatpost
- Soft rubber block and Velcro loops hold pumps tightly
$2.19 - $7.99
• Secures frame pump to frame
• Nylon
• Also good for use as a watch band
$41.99
- 22" high flow steel barrelled floor pump
- Presta/Schrader auto select head
- Ball needle and inflator adapters included
- 2" EZ Read gauge
- 160psi maximum
$149.00
Originally designed in the 1950s when the Bianchi-Pirelli team requested a pump that could fit under the rear seat of the Fiat team car, the Pista pump quickly became an icon of professional team cars and mechanic workstations at 6-Day track events around the world. The compact form of the pump, and the ability to lay completely flat, allow the pump to take up minimal space in a trunk, duffel bag, or larger tool kit, making it a true icon of the sport amongst the cycling cognoscenti.
In 2017, we took all of the qualities of the original Pista and introduced a re-engineered, limited-edition version of the pump with the iconic Molteni orange barrel to celebrate 100 years in business. These modern orange pumps were initially meant to be a limited-release product to celebrate our heritage, but the positive response and demand for the product have continued. As we're now in our second century of making high-performance pumps, we're pleased to make Pista part of our permanent floor pump line-up and will offer it in a modern red livery moving forward.
- Durable, high-strength steel barrel
- Compact ash wood handle with hose guides
- High-efficiency SILCA leather piston assembly
- Brass check-valve assembly
- Long filler hose with integrated Schrader chuck
- Push-on alloy Presta chuck with bleeder valve
- Rated to 220psi
$47.50
Serfas does it again with the innovative 2-In-1 Shock/Tire pump. Throw it in your pack for every ride and you have a dual-purpose pump that boasts a 300psi capacity. It uses a dual action motion to make it easy to pump in higher volumes or higher pressures. The aluminum construction makes it super durable. A large gauge is easy to read and the air-release button makes fine-tuning pressure in shocks and tires a breeze.
$45.00
Serfas' FP-200 Floor Pump lets you fill your tires in no time. It has a durable metal barrel for maximum inflation power. Its ergonomic handle and top-mounted gauge make pumping super easy. Plus, Serfas' easy-to-use Simple Valve head accepts all valve types and includes additional attachments to inflate balls.
• Durable metal barrel and base and ergonomic handle
• Easy to read top-mounted large gauge
• Equipped with ball and accessory attachments
• PSI capacity: 160 psi
$57.50
Air Force Tier Three floor pump
- Premium Rubber Overmolded Ergonomic Handle
- Top Mounted 2.5" Analog Pressure Gauge (PSI/BAR)
- Larger More Stable Pump Base
- Simple Valve Head (Presta/Schrader)
- Integrated Hose Keeper
- All Metal Barrel and Pump Base
- 28 1/2" Pump Height
$23.00
The best of both worlds are now combined into one. Three tire levers and a CO2 inflator head round out this combo tool.
Features:
- 1 Tire Lever With Built In CO2 Inflater
- 2 Tire Levers With Built In Spoke Hooks
- Presta & Scharder Valve Compatible
Specs:
- Number of Tools: 2
- Weight: 38 Grams
- CO2 Lever Length: 5 1/4?
- Lever Length: 4 1/2?
$60.00
The ultimate starter combo kit!
- Medium-sized saddle bag
- Ballistic nylon bottle cage
- 15 function super tool with CO2 inflator
- Tire levers
- 8-piece patch kit
- 2 threaded 16g CO2 cartridges
$38.00
A CO2 inflator and mini tool in one, Serfas's ST-13i features 1.5, 2, 3, 4, 5, 6 and 8mm Allen keys. It also has Phillips and flathead screwdrivers, T25 and T30 Torx wrenches, and CO2 inflator head (cartridges sold separately). This compact, metal mini tool nearly does it all.
$39.99
All the features you need at a price that’s hard to beat!
Features:
- Ergonomic Rubber Coated Handle
- Extra Tall 28 1/2-inch Height
- Simple Valve Head Fits Presta and Schrader Valves
- All Metal Barrel and Nylon Base
- Equipped With Ball and Accessory Attachments
Specs:
- Capacity: 160 PSI
- Weight: 1,262 Grams
$53.00
RockShox simplifies your pack with this HP 2-Stage Air Pump. Throw it in your pack for every ride and you have both a shock and tire pump that boasts a 300psi capacity. The aluminum construction makes it super durable and the head fits both presta and Schrader valves. A large removable gauge is easy to read and the air-release button makes fine tuning pressure in shocks and tires a breeze. And it includes a mounting clip to mount to water bottle bosses.
$24.95
Prestacycle Alloy CO2 Pump is NOT a complete pump. Roughly the size of a CO2 cartridge and much lighter weight, this is your LAST CO2 cartridge. Simply attach it to your CO2 head, open the valve and pump! Eliminate CO2 range anxiety without having to carry a whole pump. If you use CO2, another pump head would be redundant. Capable of reaching 120+ psi, this is not the fastest pump, but a whole lot faster than walking. CO2 head required, not included.
- Replace your spare CO2 Cartridge with a backup that never runs out
- Same overall space as a CO2 Cartridge, and much lighter
- Use your CO2 Head. No need to waste space and weight with a full pump
- Compatible with Many Heads. (Push to inflate heads must be held open)
- Engineered with a compression ratio to easily reach 120psi
- End CO2 range anxiety, So much faster than walking!
- Only 111mm (4.4?) by 20mm (0.8?) diameter
- Weighs only 35 grams!
- CO2 Head required, NOT INCLUDED
- Presta ONLY. Most CO2 Heads only work on Schrader valves with high Cartridge pressure.
Features:
The ENDLESS spare CO2 Cartridge!
The Prestacycle Alloy CO2 pump is the end of CO2 range anxiety. CO2 is great for fast, high pressure fill-ups, however, when you’re out, you’re out of luck! You can carry as many Cartridges as you think you need, now your last one can be endless.
Same space as a cartridge, but lighter.
CO2pump takes about the same space as a cartridge, but weighs only 35 grams. Unlike pumps, why waste space and weight to carry a pump head? Your CO2 Head is already a pump head with CO2pump. Although small, CO2pump is engineered to service high pressure. We designed a tiny pump with a compression ratio that enables you to reach 120psi without straining. With our design, smaller simply means more strokes, not a lack of pressure.
Compatible with most brands of CO2 Heads*.
Got a favorite CO2 Head? Already own one? CO2pump works great with most Heads. Simply attach the pump like a cartridge, open the valve and start pumping. *If your Head is a push-to-inflate head, you will need to hold the “push” action open while pumping.
CO2pump is so much faster – than walking.
No matter what goes wrong, inflation will not be the problem that keeps you flat. CO2pump will get you back on the road.
Specifications:
- Replace your spare CO2 Cartridge with a backup that never runs out
- Same overall space as a CO2 Cartridge, and much lighter
- Use your CO2 Head. No need to waste space and weight with a full pump
- Compatible with Many Heads. (Push to inflate heads must be held open)
- Engineered with a compression ratio to easily reach 120psi
- End CO2 range anxiety, So much faster than walking!
- Only 111mm (4.4?) by 20mm (0.8?) diameter
- Weighs only 35 grams!
- CO2 Head required, NOT INCLUDED
Disclaimers
CO2 Head required, not included. Compatible with most brands of CO2 Heads. Note: push to inflate heads need to be held in the inflate position while pumping.
$17.99
Planet Bike's Dial Gauge makes it easy to ensure you always have the right pressure in your tires, which makes the riding easy and helps prevent flats. Built to last, this quality gauge works on all valves and has a large easy-to-read dial.
$17.99
If you're rolling on fat tires, the Fat Max 15 is for you. Most tire gauges just don't offer the precision needed for fat tires where 1 or 2 psi can make a huge difference. The strong and durable Fat Max 15 is specifically designed to read tire pressures from 2-15 psi so you can take the guess work out of finding the right pressure for your fat tire bike.
- Designed with a low pressure range of 2-15 psi specific for fat bike tires
- Durable case and crystal lens
- Retains reading until reset
- White face plate for easier reading
- Compatible with Presta valves with removable core
- Presta/Schrader adaptable head
- Length: 120mm
- Weight: 101 grams
$10.99
Compatible with Planet Bike ALX, AL, STX, ST, and COMP floor pumps
- Dual head with hose
- Will work with any floor pump Planet Bike has made except for Air Supreme
$19.99
You'll have a whole lotta love for this CO2 inflator on long rides. It fits Presta and Schrader valves and weighs next to nothing. The cartridge is insulated with a sleeve to prevent frozen fingers and the small size means the Red Zeppelin fits easily in bags, pockets and packs. Two 16-gram cartridges are included. Now you'll never be stuck like a "Fool in the Rain."
$39.99
High-pressure shock pump with gauge
Our Shockmate 3.0 high-pressure bicycle suspension pump is designed to efficiently and accurately maintain your bike’s suspension to ensure that your shocks are neither too stiff nor too soft. It's compact and rugged and features an 8" swivel hose and alloy valve head for secure attachment and easier pumping. The easy-to-read gauge and bleeder valve help you fine-tune the suspension sag on your bike's front and rear shocks to give you the best ride performance. Whether you have a mountain bike with full suspension or just a fork shock, take the Shockmate 3.0 along on your next backcountry adventure.
- Compact and rugged design is ideal for backcountry adventures
- Locking T-handle for comfortable and efficient pumping at high pressure
- 8" swivel hose and alloy valve head for secure attachment and easier pumping
- 1.5" industrial grade gauge is precise and easy to read when setting suspension shock sag
- Bleeder valve for fine-tuning pressure
- Rebuildable
- Length: 260mm
- Weight: 149 grams
$24.99 - $28.99
Small enough to carry along yet big enough to pump efficiently. The PMP-4.2 comes with a handy holder that bolts under a water bottle cage and holds the pump securely. All-aluminum barrel construction ensures long life and smooth operation.
- Presta- and Schrader-valve compatible
- Includes mounting hardware to securely attach to water bottle bosses or under bottle cage
- Maximum pressure 90 PSI/6bars
- Approximate weight 4.6oz/130 grams
- 10.5 inches in length (265mm)
$5.90
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
$147.95
Built and designed for bicycles, the INF-2 utilizes a redesigned, more durable, dual-sided, 360º rotatable Presta and Schrader head. The INF-2 also sports a new, lighter weight body and a redesigned trigger to facilitate multiple hanging options. It features a built in pressure gauge (0–160 psi, 0–11 bars) with a protective gauge boot, and the body accepts any 3/8" NPT male threaded fitting. Built for everyday shop use and 100% rebuildable!
$38.00
The BARkeep integrates Portland Design Works' exclusive Tap Handle technology that carefully controls the flow of CO2. Compatible with both Presta and Schrader valves, the BARkeep also integrates a pressure gauge to ensure a perfect pour to fix your flat. A beginner-friendly CO2 inflator!
- CO2 inflator with integrated pressure gauge
- PDW exclusive Tap Handle technology controls CO2 flow while protecting your hand from frosty cartridges
- Weight: 94g (3.3oz)
- Length with Tap Handle: 175mm (6.9")
- Length without Tap Handle: 87mm (3.5")
$35.00
Portland Design Works' Ninja Pump puts the ancient arts of stealth and power in the palm of your hand. It is master of two fighting styles: Pump and CO2 inflator. It knows the way of the Schrader and Presta, and threads on to both for secure inflation. Like any highly-trained warrior, it excels under pressure, and can overcome even the most formidable 120psi tire.
- Alloy construction
- Control knob easily regulates CO2 flow
- Composite pump mount fits under bottle cage
- Weight: 74 g (2.6 oz)
- Length: 147 mm (5.75")
- Lifetime PDWarranty
$28.00
Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. It includes a control knob to keep you in charge of the pressure and a threaded Co2 cartridge with a neat leather sleeve. And, it fits both Presta and Schrader valves.
- Inflator only height: 44 mm (1.75")
- Inflator only weight: 40 g (1.5 oz)
- Leather sleeve length: 55 mm (2.25")
- Weight of inflator with cartridge: 80 g (3 oz)
$22.00
Portland Design Works' incredibly lightweight and compact Tiny Object CO2 Inflator efficiently fills flats. Use the control knob to dial in the perfect pressure while the included leather sleeve protects your hands from frosty CO2 cartridges. Its rugged alloy body is built to withstand years of road- and trail-side repairs.
- Presta valve compatible
- Control knob easily regulates CO2 flow
- Full grain leather sleeve is vegetable tanned and conditioned with natural oils and waxes
- Lifetime PDWarranty
$16.99
- MSW threaded CO2 Cartridges fit all MSW inflator heads as well as non-MSW inflators
- 38-gram threaded cartridges are sold individually
$34.99
Keeping your bike's tires properly inflated is the best way to ensure a happy ride. Maintain pressure and avoid pinch flats with MSW AirLift Floor Pumps.
- Dual head works on both Presta and Schrader valves
- Steel Barrel with durable composite base
- Max pressure: 150 psi
- 32-inch long hose
- 2.5-inch diameter gauge
- On-board inflation adapter kit for toys, balls & rafts
- Overall height: 25-inches
$16.99
MSW Windstream Inflator Head is a push on inflation system. Compatible with all 3/8" threaded compressed gas cartridges. Works with Presta and Schrader.
- Compact design for easy storage
- Alloy construction for durability and lightweight
- Press on for both Schrader and Presta valves
- Compatible with all 3/8" threaded compressed air cartridges
Page 1 of 10
Next page