Handlebars

Whisky's No.9 24f Carbon Drop Bar is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. Full carbon construction offers a light, stable platform while reducing vibration and adding comfort. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - Carbon - 220g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers

Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.

The No.9 6F Carbon is Whisky's modern racing styled drop bar. It is equally at home on tarmac, gravel or twisty cyclocross courses. From group rides to racing, this bar is a great addition to almost any bike. The comfortable 6-degree flare provides excellent control and comfort with just enough forearm clearance from the drops. This bar features a slightly deeper drop section compared to Whisky's wider flared offerings. The reach is also slightly shorter to compensate for the now-common, longer hydraulic STI levers from many manufacturers. - Unidirectional carbon fiber construction - Measured Center-to-Center at the levers - Drop/Reach: 125/67mm - 6 deg flared drop - Clamping Torque: 5Nm

Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars. They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm. The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.

Thomson's Carbon Road Handlebars are as light, stiff and strong as they are beautiful. Thomson crafts them of three types of unidirectional Toray carbon, molding them in one piece and putting a mild wing shape on top for a nice platform and support for your hands. And you get the perfect bend for riding in all hand positions with plenty of clearance for your wrists at any bar angle. Plus, there are provisions on the bottom for the cables so you get a tidy tape job and even more comfort.

The Surly Corner Bar is for off-road riders who want to give drop bars a try without swapping out the drivetrain and brake levers on their current mountain setup. Does that make it an economical option for fresh excitement on the trail? Yes, it does. - Chromoly steel with custom-butted tubing - 22.2mm grip diameter - 25.4mm clamp diameter - One set of 25.4/31.8 x 60mm Problem Solvers shims included

If variety is the spice of life, then the Moloko bar oozes umami at every bend. It offers a multitude of hand positions to keep you comfortable and in control over the course of a long day riding over varied terrain. It also has plenty of spots to mount your various accessories. Dangle a handlebar bag from it, strap some lights to it, throw a GPS on it (if that's your thing), and ride all day. It comes in a standard width of 735mm but if 685mm is more your style, don't you worry. Surly added cut marks so you can easily make it so. - Material: CroMoly steel - Clamp diameter: 31.8mm - Width: 735mm; Cut marks for 685mm - Rise: 0 - Sweep Angle: 34 degrees - Weight: 709g - Color: E.D. coated Black

- Heavy duty steel construction - Variety of rises offered - Due to size some of the larger handlebars are freight intensive

Heavy-duty steel construction.

Lightweight aluminum construction with a versatile riser bar design.

Sturdy steel construction with a versatile riser bar style.

- Slightly shorter version of the popular hi-rise style - Available in chrome plated and black versions

- Freeride inspired all mountain suitable geometry makes the bar extremely versatile - Rock solid in the park or on the trail - Cost effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life even further - Material: Alloy - Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm) - Diameter (mm): 31.8 - Rise (mm):25 / 40 / 60 - Length (mm): 785 - Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm) - Finish: Shotpeen anodized, laser logos

The Salsa Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12° flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops. - Lightweight and strong 6061-T6 aluminum alloy construction - 115mm drop, 68mm reach, 12° flare angle, 12° drop angle - Available in 38, 40, 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 314g (44cm)

The Salsa Cowchipper provides comfort, control, and efficiency for long days in the saddle, whether road touring, crushing mixed surfaces, or conquering the Great Divide. While the Cowchipper retains some resemblance of a traditional road bar, its radical 24° flare in the drops boosts leverage, stability, and comfort dramatically. - Lightweight and strong 6061-T6 aluminum alloy construction - 116mm drop, 68mm reach, 24° flare angle, 12° drop angle - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 322g (44cm)

Mountain bike terrain is bigger and burlier than ever, so why shouldn’t your components be? Our Guide 35.0 Carbon handlebar increases front-end strength and stiffness for more precise handling inputs. The carbon fiber construction keeps weight to a minimum and soaks up trail chatter. Pair these carbon mountain bike handlebars with our Guide Trail 35.0 Stem and carve, drop, pump, and jump your way down the mountain with confidence. - Bar Clamp Diameter: 35.0mm - Color: Carbon - Width: 760/800mm - Rise: 10/20/40mm - Back Sweep (deg): 8 degree - Upsweep: 5 degree - Material: Carbon

Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Lightweight and strong 6061-T6 aluminum alloy construction - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars - Weight: 374g - Note: Rustler bars are not compatible with bar ends

With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build. - Material: 6061 alloy - Width: 670mm - Rise: 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 25.4mm - Bar-end compatible: yes - Weight: 399g

The evolution of Ritchey handlebars continues with the WCS ErgoMax. This new bar enjoys a rich history of handlebar design and development and combines it with the modern demands of discerning riders who enjoy riding varying surfaces. Designed to enhance control and comfort when riding along loose surfaces, the ErgoMax is ideal for a gravel bike since it places the hands in a wider, more stable position while in the drops. The ErgoMax is just as perfectly situated on road bikes that are built for endurance, its ergonomics delivering unparalleled comfort. The bar tops employ a 10mm rise at the clamping area, which offers a slightly more upright riding position. They are then ovalized and have a slight 4-degree rearward sweep to more evenly distribute the weight of the rider's hands and wrists, also putting them in a more natural position. Continuing with an eye towards ergonomics, the ErgoMax also features drops with a nice, 12-degree flare to keep the rider's hands in a comfortable and confident position, while also adding a bit more unobstructed stability when turning or sprinting. The new Ritchey ErgoMax bar delivers more control, welcome comfort, and increased confidence when riding gravel, setting out on multi-day adventures, or rolling along those long miles of tarmac. - Material: triple-butted 7050 alloy - Bend style: compact - Top style: flat - Drop: 128mm - Reach: 73mm - Drop flare: 12° - Flare out: 3° - Backsweep: 5° - Clamp diameter: 31.8mm - Accessory mount diameter: 31.8mm - Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing, C260 compatible - Clip-on compatibility: no - Other features: C260 not compatible - Weight: 270g (42cm)

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon is the product of an intense and in-depth research and development program. This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption - Full uni-directional (UD) carbon construction with efficient orientation and placement of the fibers to maximize strength and fine tune stiffness - UD carbon fiber layup is specific to each model and rise

Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep

Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number. - Manufactured from cold drawn, seamless 6061 Aluminum - Shot peened for increased fatigue life - 35 optimized triple butted design

Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward

Our Range Handlebar Gen 3 remains focused on ergonomics and comfort, with a width of 800mm and a new 35mm diameter option. With the industry continually trending towards frames with longer reach, our Range Handlebar Gen 3 prioritizes minimizing back discomfort and wrist fatigue so you never feel like you have ol' bird bones on your climbs or descents. PERSONAL PREFERENCE Whether you're an OG or looking for that new new, the new Range Bar now comes in both 31.8mm and 35mm options. WRIST & BACK SAVERS A comfy combination of 10 degree back sweep, 5 degree upsweep and a 30mm rise puts your arms and shoulders in a more relaxed position. LOST WEIGHT, BUT GOT BIGGER? Science? Physics? Engineers are crafty. By maximizing the butting profiles, we removed as much as 25 grams from our previous bar.

Origin-8's Bat Wing Handlebar delivers futuristic looks and a wrist-friendly 25-degree sweep. It's crafted from lightweight aluminum and features a hydroformed center section with plenty of room to mount accessories.

Origin-8's Pro Pulsion Bull Horn Handlebar is crafted from lightweight 6061-T6 aluminum. It features a great bullhorn shape that works great for fixed gear and city bikes. And, it comes in a bevy of colors to add some style to your ride.

Explore some trail with Origin-8's Pro Pulsion Pro Sweep 6 Handlebar. This 640mm-wide bar is crafted from lightweight aluminum and features a comfortable 6-degree sweep.

Not small, not big, the Human bars have a classic 8.75" rise. Like all Kink handlebars, the Human bars use only the best 4130 chromoly steel material and our TruTherm post-weld heat treatment process to ensure maximum strength. The 13-butted tubing design means the bars are thicker in the bends, which adds strength where bars need it most. TECH SPECS - Rise: 8.75-inches - Width: 29-inches - Backsweep: 12 Degrees - Upsweep: 1 Degree - Tubing: 13-Butted 4130 Chromoly Steel - Heat Treatment: TruTherm Post-weld Heat Treated - Weight: 27.6oz

As the name suggests, the Williams bars are Nathan Williams' signature handlebars and feature all his preferred geometry. The 9.25" rise is a traditional height, without being either too tall or too short. The unique 1.5-degree upsweep is just slightly up from most traditional bars, and the 11-degree back sweep is slightly less, creating Nathan's preferred feel. The 13-butted chromoly tubing construction, and TruTherm post-weld heat treatment process ensure these bars have no problems standing up to Nathan's insane level of riding. TECH SPECS - Rise: 9.25-inches - Width: 29-inches - Backsweep: 11 Degrees - Upsweep: 1.5 Degree - Tubing: 13-Butted 4130 Chromoly Steel - Heat Treatment: TruTherm Post-weld Heat Treated - Weight: 27.8oz

Upgrade your bike with FSA's Omega Road Handlebar. The double-butted, tapered and shot-peened aluminum construction makes this bar light and durable. It also features an ergonomic curve for comfort and a variety of hand positions. Plus, the Omega even sports a groove that makes cable routing easy.

With the EC70 Aero, you'll stay comfortable while reducing drag. Thanks to the flattened top profile with internal cable routing and MCD shape technology, this handlebar provides more comfort during long days in the saddle while cheating the wind. And with Easton’s proven composite TaperWall technology and Intelligent Flexibility, the EC70 SL is nice and light at just 255 grams (42cm). - Weight of 42cm bar (grams): 255 - Bar Drop (mm): 130 - Drop Bend Style: Compact - Bar Reach (mm): 80 - Material: Carbon - Bar Top Style: Flat

A great bar for your fixie, single speed, or cruiser. - Aluminum Arc bar with wide sweep - May come in OEM packaging - Back Sweep (deg): 27 - Material: Aluminum - Rise: 0mm

These are 31.8mm flat top road drop bars with very shallow reach. - Double-butted and tapered 6061-T6 aluminum bars - 120mm wide center section with 31.8mm diameter - Flat top bar with cable grooves - Accessory Mount Diameter (mm): 31.8 - Bar Clamp Diameter (mm): 31.8 - Bar Drop (mm): 125 - Bar Reach (mm): 70 - Bar Top Style: Flat - Clip-on Compatible: Yes - Color: Black - Defined Color: Black - Drop Bend Style: Compact - Material: Aluminum - Weight: 266g - Width: 38cm - Width Measurement: Center

Dimension Road handlebars are available in 25.4 and 26.0mm clamp diameters and have double grooves for cable routing.

Traditional trekking bar with butterfly bend provides many options for hand positions, making this bar a comfortable choice for touring and recreational cyclists alike. - Designed for City-Trekking use - Not intended for mountain biking - Bar Clamp Diameter (mm): 25.4 - Color: Black - Lever Compatibility: Mountain 22.2 - Weight: 479g - Width: 585mm

- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9-degree backsweep and 5-degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength to weight ratio - Base Handlebar uses 6061 aluminum

- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9 degree backsweep and 5 degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength to weight ratio - Base Handlebar uses 6061 aluminum

A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9-degree backsweep and 5-degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength-to-weight ratio - Base Handlebar uses 6061 aluminum

The SL-70 Aero is a unidirectional carbon handlebar is packed with the innovations for best-in-class fit, ergonomics, and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp's latest bar refinements while building on the trend-setting aero legacy of the VukaSprint. The wing-shaped top was designed using Computational Fluid Dynamics (CFD). The difference of that design is real, saving 6.4 watts over a round-tube section bar top. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The revised 10° ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in drops. - Updated distinctive Zipp cosmetics - 70mm reach and 128mm drop allows for a low and aero drops position - Internal cable routing is easy with Rapid Route - Lifetime warranty

Light weight, comfort, and strength: the new SL-70 Ergo is the ultimate handlebar for long days in the saddle. The SL-70 Ergo combines the flat bar top shape of the beloved Contour SL bar with numerous modern features sought after by riders and pro bike fitters. The SL-70 Ergo sports a 70mm reach and 128mm drop. The short 70mm reach has been a popular choice in recent years, as it allows bike fitters flexibility in achieving a comfortable position without sacrificing steering control. The drop utilizes a variable radius, allowing for multiple hand positions and deeper movement into the drop. As a result, reach to the brake lever is shorter. A 3° backsweep on the flat tops keeps the wrist in a comfortable position, essential for long days on pavement or gravel, while the 10° ramp angle provides a smooth transition to modern shifter hoods. Brake and shifter housing is elegantly hidden along the underside of the bar. - Updated distinctive Zipp cosmetics - Unidirectional carbon built for stiffness, comfort, and light weight - Flattened top shape with 3° backsweep for comfort - Variable radius drop for multiple hand positions and deeper movement into the drop. - Lifetime warranty

On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 Ergo handlebar. The Service Course lineup provides options to match every rider with a high-performance, precise fitting bar. The Service Course 70 Ergo packs a powerful punch of everything you'd want in a bar — a design based on feedback from pro bike fitters and riders, an ergonomic top section, and a price you'll love. - 6061 aluminum for low weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape to better fit the hand - ISO 4210 compliant

On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 XPLR, our newest drop-bar offering. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle — from paved roads to gravel, mud, dirt, and even singletrack. The Service Course 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Whether on a two-hour training ride from home or a 200-mile gravel adventure, today's riders demand more of their cockpit: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops while focusing on two crucial metrics — outsweep and flare. - Bar drops provide a wider, balanced, and secure position with drops that are about 6cm wider than the hoods position for technical or intense riding. - The 70 XPLR features an ergonomic top with an extended 100mm clamping area for computer mounts, aero-extensions, bags, and whatever else you may need for the long haul. - Reach: 70mm - Drop: 115mm

When it comes to matching style with function, Zipp's stalwart Service Course 80 handlebars now have an option for those who prefer an ergonomic flat top. The Ergo version retains the same 80mm reach and 125mm drop of the existing Service Course 80 bars, with an ergonomic bend for the rider who likes reaching down to, rather than into, the drops. Lightweight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - New flattened bar top and 3° backsweep for a neutral wrist position on the tops - 7° ramp angle for a flat transition to the hoods and 4° outsweep at the drops - 80mm reach and 125mm drop for a medium-high position - 6061 aluminum for low weight and durability - Di2 RS910 junction compatible - Compatible with clip-on extensions (sold separately)

The bar offers the same compact reach and drop dimensions as the Service Course SL-70 but adds a flattened top section for a natural ergonomic grip on the bar tops and a revised ramp angle for proper fit. The SL-70 Ergo's specially tuned drop shape creates comfortable hand positions with the short reach to control levers vital for race situations. The bar's 128mm drop help puts the rider low and in control without compromising comfort. Whether it's a rider with smaller hands or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible (40, 42, 44cm sizes only) - Lifetime warranty

The Service Course SL-70 is the bike fitter's go-to bar. The short reach to the hoods allows a proper fit without compromising stem length and steering control. With the revised ramp angle, proper fit is now achievable on even the most challenging setups. The 70mm reach is the shortest of Zipp's Service Course bars. Together with its 128mm drop, the bar is deal for riders preferring a low body position. Whether it's a rider with a shorter torso or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Matte Black nano blast aluminum - Clip-on Compatible - Lifetime warranty

This is Zipp's innovative all-road handlebar, the Service Course SL 70 XPLR. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle—from paved roads onto gravel, mud, dirt, and even single track. The Service Course SL 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Today's riders demand a few things out of their cockpit, whether they are doing a two hour training ride from home or a 200 mile gravel adventure: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops, specifically focusing on two crucial metrics: outsweep and flare. Outsweep is created by rotating the drop below the brake perch outward. Flare is created by rotating the entire drop above the brake perch outward. - Distinctive Zipp cosmetics - 70mm Reach and 115mm drop allow a comfortable hoods position and a shallow drops postion - 5° drop Flare and 11° drop outsweep creates a drops position 6cm wider than hoods - Ergonomic top with 3° backsweep - Lifetime warranty

Zipp Service Course SL 80 Ergo handlebar is all about making you faster in style and comfort. The bar offers an 80mm reach and 125mm drop, perfect for a rider looking for a medium reach and shallow drop who likes reaching down to, rather than into, the drops. This bar has a flattened top and 3° backsweep for a neutral wrist position on the tops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits, the Service Course SL 80 Ergo is our first ergo bar to be clip-on compatible. Made of 7050 aluminum, the Service Course SL 80 Ergo weighs 275g for a 42cm-wide bar. Light weight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 80mm reach and 125mm drop for a medium-high position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible (40, 42, 44cm sizes only) - Di2 RS910 junction compatible - Lifetime warranty

The Service Course SL-80 provides comfortable and efficient positions on the bar tops, brake hoods, or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80's rounded bar top is clip-on compatible. Forged from lightweight 7075 aluminum. - Distinctive Zipp cosmetics - 7050 Aluminum - 80mm reach/125mm drop designed to fit a large number of riders - Clip-on compatible - Lifetime warranty

Zipp’s Vuka Aero redefines aero handlebar conventions while being compatible with modern-day aero bikes. The current redesigned Vuka Aero builds on the technological foundation of aero excellence set by the original version. Vuka Aero is an integrated aero bar that features market-leading adjustability; it can be used with any stem to help you find your ideal position on the bike. The airfoil used in the Vuka Aero is based on the shape of the SL-70 Aero road bar. The result is an aero bar that’s stiff and streamlined while maintaining the UCI’s 3:1 aspect ratio requirement. - Market-leading adjustability in pad fore-aft, width, height, and angle - Integrated Carbon Aerobar works with any 31.8mm clamp stem - Integrated SRAM eTap AXS Blip box mount in the Center Cap - Rapid Routing cable exits are positioned for easy installation of brake cables - Vuka Aero ships with base bar, extension clamp, and armrest clamp - Extensions sold separately

Zipp's Vuka Shift AXS 90 is more than an aero extension; it's a complete shifting system. Think of it as a supremely efficient solution to house the brains of your SRAM RED or Force eTap AXS time trial or triathlon bike. The Vuka Shift AXS 90 cleanly houses your aerobar extensions, shift-control, and head unit in one neat and clean package. This approach solves an emerging problem of the age of electronic shifting. The time for system integration is now—with this seamless solution. The extensions themselves feature the pro-proven Vuka Evo shape with a 90mm rise. The Vuka Shift AXS 90 is compatible with more than 90 percent of the integrated aerobar systems currently on the market. - AXS Integrated Aerobar shifting system - Length is trimmable, 10mm at front and 90mm at rear - Integrated Garmin/Wahoo/Bryton computer mount - Ships with SRAM Clics extension-end shifters and Blips shifting buttons for brake-lever position shifting - More than an aero extension, this is an integrated shifting system for the modern triathlon/TT bike - Cleans up your aero cockpit for simplicity and optimized aero efficiency

Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you. - Unidirectional carbon fiber construction - Trimmable ends, made easy with graphic markings - No rider weight limit - ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle - 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep - 825mm wide - Weight: 288g

Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers

Whisky's No.7 24f is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers

Whisky's No.9 Flat Bar keeps your weight lower and more forward on the bike for a more aggressive riding position. It’s wide, sleek, and tested to the highest standards to deliver hours of reliable trail riding. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.

The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.

The No.9 12F Carbon is Whisky’s most versatile drop bar, that’s equally at home on tarmac, gravel, twisty cyclocross courses, and double-track. From touring to racing, this modern bar is a great addition to almost any bike. The comfortable 12-degree flare provides excellent control and comfort, especially off-road or in challenging conditions. A semi-compact design offers seamless transitions between positions, and we’ve made smart updates to improve compatibility with all your favorite drop bar controls. - Unidirectional carbon fiber construction with new carbon layup to better accommodate clamping forces of modern controls - Drop/Reach: 115/68mm

The No.9 24F carbon drop bar is designed for comfort and control in challenging situations. Specifically aimed at long-distance touring, gravel, and off-road pursuits, the 24-degree flare offers huge control from the drops. The carbon construction provides a light, stable platform that reduces vibration and adds comfort, plus a new carbon layup that better accommodates clamping forces of modern controls. This thoroughly modern drop bar is the perfect match to your off-road tourer, monster cross bike, or get-rad CX rig. The 24F’s sleek design offers a seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs.

The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding

Ergonomnic and elegant, the Whisky 438 Aluminum Scully Bar brings much needed relief for long hours in the saddle – without compromising reach or stem length. The 23-degree backsweep and 5-degree upsweep create an easy, natural handling position, leaving little room for tricep fatigue. The generous clamping space and clean, lightweight design means this ISO tested bar tastes all types of terrain. For a custom feel, the Scully Bar comes in two trimmable widths (820mm and 780mm) to perfect your grip length and enhance overall performance.