Handlebars

The EC90 SLX is comprised of advanced carbon construction for Easton’s lightest road bar to-date. This handlebar features Easton’s new MCD shape technology for a unique ride quality and comfort. TaperWall technology and Intelligent Flexibility team up to deliver a perfectly tuned bar that weighs just 195-grams. Shimano, SRAM or Campagnolo levers can be positioned for a smooth transition on the tops and into the bend, with cables wrapped neatly in the bar’s designed recesses. - Bar weight: 195mm (42cm) - Width (center-to-center): 38cm, 40cm, 42cm, 44cm, 46cm - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 125mm - Materials: EC90 carbon

Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward

Sturdy steel construction with a versatile riser bar style.

After years of research and development dedicated to perfecting the 35mm bore handlebar, DEITY has created the best-feeling carbon line of handlebars to date. Gone are the days of blown-out hands and varying degrees of arm pump after a day on your new 35mm bore oversized super-stiff handlebar. Our all-new Skywire Carbon Trail handlebar delivers the same level of strength and comfort you've come to expect from DEITY with a very specific focus on increased performance and time on the bike. Perfectly spec'd at 800mm wide with 15mm and 25mm rise options, this beauty promises to keep you on the bike longer with a shorter recovery between rides. - Oversized 35mm Bore Carbon Handlebar - Designed for Enduro / All Mountain / Trail - Developed and designed exclusively with our own in house DEITY molds - Unidirectional Carbon Construction - Damping properties reduce hand fatigue - 800mm Width - 9 degree bend x 5 degree upsweep - The ultimate combination of strength, weight, and ride quality - Textured non slip stem clamping surface - Textured grip ends for added bite - Covered by our Lifetime Crash Replacement Policy to the original owner - Recommended MAX Torque Spec range (4 - 4.5 Nm) - 15mm rise: 222 grams - 25mm rise: 226 grams

The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams, the BLACKLABEL 800 is the evolution of over a decade of DEITY handlebar development. By widening the center bore area, we could increase strength while still delivering an incredibly comfortable, stable, and responsive feel that is unmatched. This premium race good is built for championships! - 800mm width - Designed for DH / Enduro / All MTN applications - Dirt Mag Top 100 Product - 4 years running for 2014, 2015, 2016, and 2018 - Incredibly detailed two-tone bead blast and polished ano finish - 9-degree bend / backsweep by 5-degree upsweep - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - Designed for maximum ride quality with a 31.8mm bore - World Cup DH / Redbull Rampage / Crankworx and FMB World Tour proven - The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams - Features measured cut marks and center alignment detail - Covered by our Lifetime Crash Replacement Policy to the original owner - 15mm rise: 333g - 25mm rise: 342g - 38mm rise: 343g

Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendant geometry from TruVativ's best enduro rider’s input - Backsweep: 7° - Upsweep: 5°

- Heavy duty steel construction - Variety of rises offered - Due to size some of the larger handlebars are freight intensive

Zipp Service Course SL 80 Ergo handlebar is all about making you faster in style and comfort. The bar offers an 80mm reach and 125mm drop, perfect for a rider looking for a medium reach and shallow drop who likes reaching down to, rather than into, the drops. This bar has a flattened top and 3° backsweep for a neutral wrist position on the tops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits, the Service Course SL 80 Ergo is our first ergo bar to be clip-on compatible. Made of 7050 aluminum, the Service Course SL 80 Ergo weighs 275g for a 42cm-wide bar. Light weight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 80mm reach and 125mm drop for a medium-high position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible (40, 42, 44cm sizes only) - Di2 RS910 junction compatible - Lifetime warranty

Profile's Ultra FR is a tough riser bar that gives you extra control in technical sections and confidence on rough descents. It's made of double-butted 6061-T6 aluminum, which offers superior strength and stiffness and weighs next to nothing.

For XC racing, stiffness equals speed. That’s what drove our thinking when building the Roval Control SL handlebar. Borrowing inspiration from trail bike tech, we knew a 35mm bar clamp width would give us the rigidity our athletes demanded, and function as the backbone for our ultra-light, hand laid up carbon. It’s light… Like, 185 grams light. But, light-weight and stiffness aren’t the only pieces of the puzzle. Riders also need high-precision control while descending, and a comfortable, sustainable position on grueling climbs. The Roval Control SL’s 780mm width allows you to dial in your perfect size, and it’s World Championship proven geometry gives the confidence to attack any segment. - Material: High modulus carbon fiber - Width: 780mm, includes cut marks to customize width - Rise: 0mm or 20mm - Upsweep: 6 degrees - Backsweep: 8 degrees - Clamp Diameter: 35mm - Weight: 185g

Whisky's all-carbon Spano Drop Handlebar is designed to give gravel and all-road riders the most natural hand positions anywhere on the bar. A multi-stage flare puts the hoods at an optimal angle for comfort while maximizing control through the drops. The bar's flat top promotes flex and offers relief from rough surfaces, and its 31.8 clamp diameter with 90mm width allows compatibility with bar-mounted accessories, including aero bars. - Available in five widths, measured center-to-center at the hoods: 40, 42, 44, 46, 48cm - Compound flare — 12 degrees at the hoods and 20 degrees through the drops - Drop/Reach: 100mm/68mm - 31.8mm clamp diameter Specifications: - Bar Top Style: Flat - Width Measurement: Center - Bar Clamp Diameter (mm): 31.8 - Accessory Mount Diameter: 31.8 - Bar Reach (mm): 68 - Material: Carbon - Clip-on Compatible: Yes - Bar Drop (mm): 100 - Flare: 20 - Defined Color: Black - Weight: 236 - Drop Bend Style: Compact

Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color

We threw in a bit of everything for our take on the ultimate gravel handlebar setup. Rise, sweep, and flare make for an ultra-comfortable handlebar that keeps you in control no matter the terrain. Add the Cruise Control Top and Drop Grips and our Really Long Bar Tape to get to next-level comfort and performance. For the rider that wants to go everywhere, the Kitchen Sink Handlebar is the bar that has everything. With widths from 44 cm up to 50 cm, it's clear we believe in wide. But the added stability and control of a wider bar should not come at the cost of comfort. So we've thrown everything into this handlebar: - 20mm RISE means less pressure on the hands and a broad range of fit options. - 7° SWEEP means the bar is positioned where your hands want to be, whether you're on the flats, the hoods or the drops. - 25° FLARE on a compact drop means a stable, aerodynamic drop position that is actually comfortable enough to use. - Optional endurance loop adds an alternative aerodynamic riding position and a perfect spot for gear storage and mounting accessories.

The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops

Our Range Handlebar Gen 3 remains focused on ergonomics and comfort, with a width of 800mm and a new 35mm diameter option. With the industry continually trending towards frames with longer reach, our Range Handlebar Gen 3 prioritizes minimizing back discomfort and wrist fatigue so you never feel like you have ol' bird bones on your climbs or descents. PERSONAL PREFERENCE Whether you're an OG or looking for that new new, the new Range Bar now comes in both 31.8mm and 35mm options. WRIST & BACK SAVERS A comfy combination of 10 degree back sweep, 5 degree upsweep and a 30mm rise puts your arms and shoulders in a more relaxed position. LOST WEIGHT, BUT GOT BIGGER? Science? Physics? Engineers are crafty. By maximizing the butting profiles, we removed as much as 25 grams from our previous bar.

- The original Chromag bar - Used from XC to DH, the OSX is Chromag's most versatile option - 31.8mm clamp Specs: - Rise: 25mm - Handlebar Width: 800mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Upsweep: 5 degrees - Backsweep: 8 degrees

Origin-8's Urban MX Riser Handlebar is made from lightweight, durable 6061 aluminum. It provides a 60mm rise and a narrow 560mm width. A large grip surface leaves you plenty of room to move your hands or mount necessities like lights, bells, and computers.

When it comes to matching style with function, Zipp's stalwart Service Course 80 handlebars now have an option for those who prefer an ergonomic flat top. The Ergo version retains the same 80mm reach and 125mm drop of the existing Service Course 80 bars, with an ergonomic bend for the rider who likes reaching down to, rather than into, the drops. Lightweight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - New flattened bar top and 3° backsweep for a neutral wrist position on the tops - 7° ramp angle for a flat transition to the hoods and 4° outsweep at the drops - 80mm reach and 125mm drop for a medium-high position - 6061 aluminum for low weight and durability - Di2 RS910 junction compatible - Compatible with clip-on extensions (sold separately)

- Integrated front extension provides additional hand positions - Designed and intended for all types of drop bar riding - Traditional drop bar shape with no flair to the drops - Lightweight 6061-T6 alloy construction - 439g (42cm)

Inspired by the BMX bars of yesteryear - 6061 T6 aluminum - Shot peened and anodized black or silver - The 22mm OD crossbar is not there just for strength, but allows installing accessories

E-Element Riser Bar - 7050-T6 aluminum bar with special Element Butting Technology for E-Bike use - Lab tested by EFBE Pruftechnik in Germany, certified for safe use on E-Bikes under the toughest conditions - Includes cutting lines and stem alignment guide marks

- Constructed from a unique blend of 13 different thicknesses of 4130 CrMo tubing\n- Unique 31.8mm clamping area that is Farr stiffer than the typical 22.2mm clamping area of BMX handlebars \n- Compatible with most 31.8mm stems

Nail 20mm Carbon Riser Bar - Created from UD carbon - Stealth black graphics on matte black - Anti-vibration taper technology for total control

- Provides extra hand positions for gravel, touring and adventure riding - Bar top features an ergo profile for comfort\n- Moderate 25 degree flare angle - Lightweight 6061-T6 alloy construction - 480g (42cm)

Double butted 7075-T6 aluminum bar, designed and tested by Freeride legend Nico Vink - Designed for riders who value strength and reliability over light weight - Increased wall thickness to withstand the toughest abuse

Building up an urban fixie or townie bike? Then you just have to have the classic Bull Horn Bars from Sunlite. They're made from aluminum with a steel center sleeve, so they're light, stiff and durable.

Sunlite's Road Handlebars are a light and comfortable addition to your road bike or gravel grinder. At 310 grams, this aluminum bar keeps your rig light while providing plenty of stability while cornering or sprinting for the hole shot. The classic road bend gives your bike a svelte look, too. And with plenty of widths to choose from, you get a bar that's tailored to your build and riding style.

• Lightweight aluminum construction • Back sweep: 6 degrees

Aluminum North Road style touring handlebar.

Forged aluminum construction with a retro curved design.