Designed to store the essentials to repair a mid-ride mechanical, our Expedition Tool Pack is a sleek, ultra-compact pack that’s excellent for short rides and bikepacking adventures. Fitting neatly under the saddle, the tool bag attaches securely to the bike with a Velcro-backed Hypalon strap that’s effective even when exposed to road spray and grit – a weakness of traditional zippers and buckles. Inside, there’s enough capacity for two spare road tubes, tire levers, a small multi-tool, and a CO2 canister. The exterior of the tool bag is protected by a tough, lightweight fabric that’s completely waterproof. Reflective graphics and a light attachment point add visibility in low light. Features - Ultralight construction, weighing only 40g - Hypalon-reinforced Velcro strap gives a secure hold in all conditions - Wide opening, allowing easy access to contents when detached - Light attachment point and reflective graphics for increased visibility - Lightweight waterproof laminate, developed specifically for Apidura Materials - The tool bag is cut from a three-layer laminate fabric that was developed specifically for Apidura. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. - The tool bag’s strap is reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. Care - Wash the tool bag by hand, using a mild diluted soap if necessary. Afterwards, let it air dry. - Do not machine wash, machine dry, or iron.
$158.00 - $177.00
The Expedition Saddle Pack is lightweight, waterproof, and provides a spacious compartment under the saddle, eliminating the need for a rear rack. It’s designed to hold clothes and equipment on long distance rides. Built from a lightweight laminate developed specifically for Apidura, the Pack is highly resistant to abrasions and tears. The seams have been welded together, creating a waterproof seal that ensures contents always stay dry, even in sustained rain. A three-point attachment system with Hypalon-reinforced Velcro straps allows the Pack to hug the seat post, increasing stability and cutting down on lateral movement. Additional Hypalon on the Pack’s body keeps frames in good condition. The roll-down compression and closure system means the Pack’s volume can be tailored precisely to fit a range of packing needs. Materials The Expedition Saddle Pack is cut from a three-layer laminate fabric that was developed specifically for us. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. The Pack’s attachment points are reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. For the straps, Woojin buckles have been chosen for their strength and reliability. Finally, a lightweight moulded section of HDPE thermoplastic sits in the Pack’s lower section to reinforce its structure.
$167.00 - $175.00
The Racing Saddle Pack is the first rear pack dedicated to ultra-distance competition and audax. Featuring a sleek design with a compact capacity, the Pack is ideal for storing light, compressible items over vast distances. Constructed from an ultralight, waterproof laminate developed for Apidura. The Pack weighs less than 210g and securely fastens with a sturdy three-point attachment system. It’s designed to fit ergonomically under the saddle, minimizing sway and reducing drag. Light attachment points are laser-cut into the fabric, increasing rider safety without adding unnecessary weight. A high-contrast reflective feature is specially designed to enhance visibility in all light conditions. A roll-top closure provides adjustable capacity, and tailored webbing, straps and buckles shed extra weight, while ensuring the simplest setup for ease of use, when every second matters. Materials The Racing Saddle Pack is made from Hexalon, a bespoke laminated fabric developed specifically for Apidura. Designed to fit the demands of ultra-distance competition and audax, the material is waterproof and lightweight, with strong tear and abrasion resistance. The attachment points are reinforced with Hypalon, a durable rubberized nylon that provides extra protection against friction and puncture. For the fastening system, we’ve chosen Woojin buckles for strength and reliability.
Axiom's Sierra LX Seat Bag is perfect for carrying your ride essentials. It's made of durable, water-resistant 600-denier polyester and attaches easily to your saddle with Velcro straps. For safety, it sports reflective trim and a taillight attachment loop.
A lightweight under-the-seat bag for carrying ride essentials. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. - Volume 0.5 L / 29 cu in - Weight 57g / 0.13 lbs - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner improves internal visibility - Lightweight Velcro saddle mounting system can be cinched down to ensure a quiet load - Zippered flap opening for easy access to bag contents while bag is on bike - Interior ID pocket - Ultra-visible 3M triangle logo - LED light clip
A high-volume under-the-seat bag and water bottle pocket designed specifically for the gran fondo cyclist. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner improves internal visibility MOUNTING SYSTEM - Lightweight Velcro saddle-mounting system ADDED BENEFIT - Zippered flap opening for easy access to bag contents while bag is on bike - Interior credit card / ID pocket - Integrated waterbottle holder - Ultra-visible 3M triangle logo - LED light clip - Volume 1.3 L / 79 cu in - Weight 126g / 0.28 lbs
A weather-resistant, bikepacking-inspired / urban-inspired seat pack bag with built-in accommodation for a U-lock. Ideal for the commuting trunk bag user who doesn't want to use a rack. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - Water-resistant stitched construction. - Heavy-duty seat rail buckle and straps, pull up to tighten. - 3 rubberized, modular seatpost straps with CAMLOCK, ensure things stay tight, while eliminating potential damage to clothing. Can use 2 or 3, in varied positions. - Top mount bungee system with wings, provides optimum stability to top loads, etc... - Top bungee system for additional, flexible storage. - Supplemental rear closure strap system provides additional support. - Ultra-visible rear 3M triangle logo. - Polypropylene plates below saddle, ensure ample leg clearance, even if heavily loaded. - Built-in U-lock holder. - Rear light clip.
Oceanweave 600D reclaimed fishnet polyester with waterproof polyurethane coating. - Heavy-duty seat rail buckle and straps pull up to tighten. - 3 rubberized modular seatpost straps with Camlock ensure things stay tight while eliminating potential damage to clothing. - Top mount bungee system with wings provides optimum stability to top loads etc. - Top bungee system for additional flexible storage. - Supplemental rear closure strap system provides additional support. - Ultra-visible rear 3M triangle logo. - Polypropylene plates below saddle ensure ample leg clearance even if heavily loaded. - Built-in U-lock holder and rear light clip.
$16.99 - $19.99
The Banjo Brothers Quick-Release seat bag. Remove your seat bag quickly with no fuss. Great for security and for using one bag across two or more bicycles. Easy on/off Twist tabs onto seat rails and then attach the seatpost strap. Two sizes. - Heavy duty 840 denier nylon construction - Cinch-strap to keep contents snug - Wide-opening design for easier access - Flap hinges up from bottom to keep contents in place - 360 degree reflective accents and web loop for light - Light loop - Fits most saddle rails
Banjo Brothers' Small Seat Bag is perfect for carrying a tube, tire levers, patch kit, a mini tool and some food (each sold separately). It's made from heavy-duty 840-denier nylon with a wide-mouth opening for easy access. And you've got 360 degrees of visibility with reflective accents and a rear tab for a blinkie.
Banjo Brothers' Small Seat Bag is perfect for carrying a tube, tire levers, patch kit, a mini tool and some food (each sold separately). It's made from super-tough 1680-denier nylon with a full liner plus a padded top and bottom. It's got a wide-mouth opening for easy access, three interior pockets and a key clip to keep your gear organized, plus gusseted sides that keep your gear in place when the bag is open. And you've got 360 degrees of visibility with reflective accents and a tab so you can attach a taillight.
If you'd prefer to carry your gear in a bag rather than stretching out your jersey pockets, Banjo Brothers' Large Seat Bag is perfect for you. It'll hold a tube, tire levers, patch kit, a mini tool, your wallet, some food, even a wind vest or camera (each sold separately). And if you're going big, it expands to haul more gear. It's made from heavy-duty 840-denier nylon with a wide-opening design for easy access. And you've got 360 degrees of visibility with reflective accents and a rear tab for a blinkie.
Banjo Brothers' Medium Seat Bag is perfect for carrying a tube, tire levers, patch kit, a mini tool, your wallet and some food (each sold separately). And if you're going big, it expands to haul more gear. It's made from super-tough 1680-denier nylon with a full liner and a padded top and bottom. It's got a wide-mouth opening for easy access, three interior pockets and a key clip to keep your gear organized, plus gusseted sides that keep your gear in place when the bag is open. And you've got 360 degrees of visibility with reflective accents and a tab so you can attach a taillight.
Not only does Banjo Brothers' Minnehaha Canvas Saddle Bag give you extra carrying capacity, it classes up any ride. It uses leather straps to securely attach to your saddle at three different points to reduce sway and the front is tapered for leg clearance. With plenty of room for a tool kit, lunch, rain jacket, etc., you'll never be without your gear. The shaped interior supports your gear without sagging and you've got leather reinforcements in all high-wear areas, too. Clever details include a leather tab for lashing extra gear or attaching a blinkie, detachable reflective tabs, an interior pocket and a key clip.
No rack, no problem. Banjo Brothers' Waterproof Saddle Trunk has a whopping 400 cubic inches of space with a waterproof main compartment and outer pockets for easy access to smaller items. A webbing loop on top lets you lash a jacket to the bag so you can reach it before the rain comes. An interior aluminum strut, stiff hull and 4-point strapping system control the load from bouncing, rattling or swaying. The best part is when you're done with your ride, you can remove it quickly and it works on pretty much any bike. - Weight: 1.25lbs - Dimensions: 12.5" L x 7" H x 6.5" W - Capacity: 400 cubic inches / 6.6 liters - Waterproof main compartment with replaceable welded liner - Outer pockets for easy access to money or keys - Webbing loop on top for attaching a rain jacket or other gear - Interior aluminum strut, stiff HDPE hull and 4-point strapping controls loads
Not only does Banjo Brothers' Minnehaha Canvas Saddle Bag give you huge carrying capacity, it classes up any ride. You can pack a picnic and extra clothes while the 3-point attachment and hardwood internal support keep the load stable. The main panel of the bag boasts a durable, layered 18-ounce canvas construction and the bottom is reinforced with a riveted plate to keep your bag from sagging under load. Clever details include detachable reflective tabs, an interior wallet pocket and exterior lashing points so you can attach a jacket or walking shoes.
Want to bikepack without breaking the bank? Banjo Brothers to the rescue. A huge seat-mounted pack for bikepacking and commuting - no rack required. Usable capacity between 800 cu in and 350 cu in. 800 cu in (13L) – 22 x 7 x 6.25. Can be compressed down to 350 cu in when full capacity not needed. Rigid hull inside front of bag for secure support even when bag isn’t full. Removable waterproof liner. Requires a gap between saddle rails and fender of at least 8". - Weight: 2 lbs - Dimensions: 22.0"L 7.0" H x 6.25" W - Capacity: 800 cubic inches / 13L - Removable waterproof liner. - Requires a gap between saddle rails and tire of at least 8". - Imported
$24.99 - $34.99
The BiKASE Momentum family of saddle bags is the perfect complement to any ride. With a narrow and contoured design, the Momentum fits snugly between the seat post and saddle without interfering with the rider, and, with a double strap design, it couldn't be easier to install. Round that out with a taillight mount and reflective striping. - Reflective stripes - Internal mesh pocket - Internal elastic band - Strap light holder - Small: 25 cubic inches - Medium: 50 cubic inches - Large: 75 cubic inches - X-Large: 110 cubic inches (Black only)
BiKASE's Wasp Saddle Bag is a durable, weather resistant case made of thermoplastic polyurethane with a waterproof zipper. The quick release mounting system fits regular seat rails and up to 10mm carbon rails. Interior mesh pocket, elastic band, and lining to keep contents organized. Plus, the Wasp is easy to clean because molded case does not absorb mud, dirt, or water. • Material: TPU • Size: 6 x 4 x 3 ½-inches • Volume: 37 cubic inches • Weight: 200 g • Rear light holder
BiKASE's Wing Side Open Seat Bag offers easy access to your belongings. No more reaching way back and trying to find your stuff as compared to rear entry bags. It features external pockets for small items and attaches easily with molded nylon T bracket and 2 hook & loop straps. With 110 cubic inches of storage capacity, it will even hold a windbreaker for those longer rides when the weather changes! Will hold a fat tire tube as well. • 2 side pockets • 2 Teflon coating mesh pockets • Webbing light holder/Rear reflective dots • PE stiffener structure • Universal-fitting T-bar mount • 2 Velcro straps for seat post mounting • Material: 840 denier nylon • Teflon coating fabric • Size: 20cm x 11cm x 10cm • Volume: 1.8 Liter • Weight: 180 g
The Medium Packer Seat Bag is the perfect seat bag with all the extra room needed for carrying the essentials. The Packer is the perfect accessory for commuting, bike packing, touring, mountain biking, road biking. - Roll up style closure with quick release buckles - Shock cord for mounting extra gear on top of bag - Reflective accents and light holder - Water resistant 840 denier nylon/TPU - 16” x 6” x 5” - Up to 550 cubic inches
The first Brooks Challenge was designed and patented in 1896. This tool bag is for fitment to the rear of saddle bearing bag loops. It features buckles that, while fastening the bag to the saddle, are located within the hold itself, thus ensuring greater levels of security. The strap that secures the unit encircles the tools it carries to prevent them from rattling during transit. - Width: 175mm - Height: 78mm - Depth: 45mm - Volume: 0.5L
The Brooks Challenge Large Tool Bag is a saddle bag for fitment to the rear of a saddle bearing bag loops or over the handlebars. It features buckles located within the hold itself to ensure greater security while the strap that closes the unit encircles the bag's contents, preventing them from rattling during transit. The first Challenge was designed and patented in 1896. The Challenge Large has a lot in common with its distinguished predecessors, but now features triple the volume! - Width: 210mm - Height: 110mm - Depth: 70mm - Volume: 1.2L
The cordura material of The LIN:K’s shell is heard-wearing and good looking, while its inner mesh pocket keeps contents organized and protected, and a water-resistant zip and semi-auto lock puller keeps things dry and secure. Reflective logos and piping right round the edges help keep you visible after dark from both sides and the rear. The hard-wearing, secure Velcro attachment strap means it’ll easily fit any bike. - Cordura Shell with Velcro Straps - Color: Anthracite - WP zip - Internal mesh pocket - Reflective piping - :K and fi'zi:k reflective logos
The Hauler Bike Packing Bag is a convertible saddle/messenger bag that is lightweight and versatile for each rider. It’s an easy way to carry a substantial amount of cargo to keep on your bike without wearing a pack and can be used as a messenger once you’re off to work, school, or play. NOTE: Photos of bags may not reflect the actual color. Each one is made with Upcycled Nylon, so colors and prints will vary. Materials: - Upcycled Colored Fabrics - Nylon Teeth with Zinc Zipper - 10 oz Vinyl Waterproof Tarp - Nylon Fabrics - Hook & Loop - Nylon and Metal Hardware - Dimensions: 9 L x 5 H x 22 D in./228 x 127 x 558 mm - Capacity: 990 cu in./16.2 L - Weight: 17.6 oz/498.9 g Features: - Universal hook & loop mounting straps - Roll-Top design excludes the need for zippers - Easy access front pockets - Frame plate secured all side to protect cargo - Straps are minimized for cyclists safety - Built in Colorado - Made in the USA - Limited Lifetime Warranty
While the Mini Tool Kit is the smallest bag in the Jandd line, it is still made to the same strict specifications as Jandd's largest mountaineering pack. - Perfect for minimalists; fits tube, tire levers and mini-tool - Three-point retention system - Main panel is doubled with an extra layer of nylon to prevent premature wear at the seat post - Seams are fully taped to prevent fraying - Made of Dupont Cordura - Weight: 40 grams - Capacity: 24 cubic inches
The Bike Bag can be mounted on either the seat rails or the handlebars. - Two point attachment to handlebar or saddle - Perfect for cruiser and comfort bikes - Made of DuPont Cordura - 3M reflective striping for visibility - Weight: 80 grams - Capacity: 150 cubic inches
The Tool Kit Bag is Jandd's most economical under-seat bag. - The upper straps, when pulled tight, will compress the load securely into the underside of the seat - Hatchback style opening provides easy access - Three-point retention system - Made of Dupont Cordura - 3M reflective trim - Weight: 60 grams - Capacity: 50 cubic inches
The Mini Mountain Wedge Series offers seat bags that are designed to stand up to the rigors of serious on- and off-road cycling. - Large main compartment and small exterior zip pocket - The three-point suspension system consists of a seat post hook-and-loop strap and a 3/4-inch main webbing strap that threads over each seat rail - A side-squeeze buckle allows for easy removal - Made of Dupont Cordura - Weight: 99 grams - Capacity: 53 cubic inches
The Mini Mountain Wedge Series offers seat bags that are designed to stand up to the rigors of serious on- and off-road cycling. - Large main compartment and small exterior zip pocket - The three-point suspension system consists of a seat post hook-and-loop strap and a 3/4-inch main webbing strap that threads over each seat rail - A side-squeeze buckle allows for easy removal - 100% waterproof - Weight: 104 grams - Capacity: 94 cubic inches
Page 1 of 3 Next page