Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Racks

Wald 215 Rear Rack
$19.99 - $61.99
Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds
Topeak Explorer Tubular Rack w/Disc Mounts
$54.95
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too.
Salsa Alternator Extra Wide Rear Rack
$120.00
The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g
Salsa Alternator Standard Rear Rack
$120.00
Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
Salsa Down Under Front Rack
$65.00
• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets
Salsa Down Under HD Front Rack
$110.00
The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets
Planet Bike Eco Rack
$39.99
Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.
Delta Post Porter Rear Pannier Rack
$64.99
- Welded, powdercoated aluminum with either quick release or bolt-on - Fits any seatpost up to 32.0mm diameter and can handle 25lbs
Axiom Fatliner FatBike Rear Rack
$59.99
Make your fat bike a load-hauling master with Axiom's Fatliner. It's disc compatible, and it's made from rugged 6061 T6 aluminum to keep strength to the max and weight to a minimum. There are plenty of mounting options to accommodate all sorts of fat bikes, and it fits dropouts from 170 to 190mm apart. Get fat, get loaded, and go adventure with the Fatliner.
Axiom Flip-Flop LX Spring Seatpost Rack
$59.99
Axiom's Flip-Flop LX Spring Seatpost Rack is perfect for hard-to-fit bikes like full-suspension models, ones with disc brakes and those without frame eyelets. This easy on/off quick-release rack is made of light and strong hand- and double-welded tubular 6061 T6 aluminum and it boasts a flip-flop support arm for mounting the rack in a high or low position, which lets it fit on most bicycles. There's ample carrying capacity with a spacious top platform that's perfect for trunk bags (sold separately) and that includes a spring-loaded bar to hold down things. You can also slide off the platform with the bag attached for convenience, and slide the platform in when not in use so it takes up less space.
Axiom Journey Adjustable 2429 Rack
$47.99
Axiom's Journey Adjustable 2429 Rack is made of light, rugged aluminum with vertically adjustable stays meaning it mounts on a wide range of rear wheel sizes. It handles even large, heavy panniers (sold separately) with additional looped struts that keep your panniers steady. There also is a platform on top, which adds strength and doubles as a mini fender.
Axiom Journey DLX Lowrider Front Rack
$49.99
Axiom's Journey DLX Lowrider Front Rack is super light and super durable. This is perfect when you're way out in the middle of nowhere or just running errands, when every gram counts and gear failure is not an option. This rack is more than just strong, cornering clearance is exceptional due to the increased height, and it's still able to handle large, heavy panniers (sold separately). Additional looped struts keep the panniers steady and there are even safety tabs to prevent your bag hooks from accidentally sliding off.
Axiom Journey Rack
$39.99
Axiom's Journey Rack is made of light, rugged aluminum. It is specially designed to handle even the largest and heaviest panniers (sold separately) with additional looped struts that prevent the bags from swinging into the wheel. It also has a platform on top, which adds strength and doubles as a mini fender.
Axiom Journey Rack w/Spring
$59.99
Axiom's Journey Rack w/Spring is made of light, rugged aluminum. It can handle large, heavy panniers (sold separately) with additional looped struts that stabilize the bags. It also has a platform on top, which adds strength and doubles as a mini fender, and a spring loaded bar to hold down your belongings.
Axiom Streamliner Disc DLX Rack
$46.99 - $64.99
Axiom's Streamliner Disc DLX Rack fits on bikes with disc brakes that don't have eyelets. It's made of reliable and light aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.
Tubus Duo Lowrider
$140.00
If your fork has inside and outside eyelets, then the DUO is your right choice. Just as the TARA, DUO tolerates extreme loads and almost all panniers. It also ­features a longitudinal hole for optimal fit and increased flexibility. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer, or by the bicycle manufacturer for mounting a carrier. There must be no crimping. - Material: 25CrMo4 - Size: 26" | 28" - Weight: 560 g | 19.8 oz - Loading Capacity: 15 kg | 33.1 lbs - Diameter: 14 / 10 mm | 0.6 / 0.4 in
Topeak BabySeat II Rack
$54.95
Topeak's tubular aluminum rack allows you to easily mount your BabySeat II or your Topeak MTX TrunkBags (both sold separately) to your bicycle. So go ahead and bring your favorite little passenger or gear along for the ride.
Topeak BabySeat II Rack (Disc Mount)
$59.95
Topeak's Disc-Mount Rack allows you to easily mount your BabySeat II or your Topeak MTX TrunkBags (both sold separately) to your bicycle. And, this tubular aluminum rack features tabs that clear most disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger or extra storage room.
Topeak BabySeat II Rack (Disc Mount, 29-inch)
$64.95
Topeak's BabySeat II rear rack allows you to easily mount your BabySeat II (sold separately) to your 29er. This tubular aluminum rack features tabs that clear most rear disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger.
Topeak Explorer Tubular Rack
$49.95
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender, too.
Topeak Explorer Tubular Rack w/Spring
$54.95
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender as well as a spring-loaded bar to hold down your belongings.
Topeak MTX 2.0 Explorer
$49.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity
Topeak MTX 2.0 Explorer 29er
$59.95
- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g
Topeak MTX 2.0 Explorer Disc
$54.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity
Topeak MTX 2.0 Explorer Disc w/Spring Clip
$59.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - Designed for compatibility with disc brakes - 800g - 55lb weight capacity
Topeak MTX 2.0 Explorer Spring Clip Rear Rack
$54.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - 800g - 55lb weight capacity
Topeak MTX 2.0 Uni Super Tourist Fat Disc
$109.95
- This one size fits all tubular aluminum rear rack is designed for Fat bikes with disc brakes - Adjustable rack legs fit most 24" & 26" Fat bikes - Integrated side bar provides a lower pannier attachment for more cargo on top of the rack - The MTX 2.0 QuickTrack plate is compatible with any Topeak MTX trunk bag, MTX rear basket, and most other rack packs and panniers on the market - Not compatible with asymmetric rear stay design Fat bike frames - Includes extra-long mounting bracket and rear light mount - Max weight 55lbs - 16.9 x 13.4 x 11.4" - 2.79lbs
Topeak MTX BeamRack
$69.95
Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
Topeak MTX BeamRack EX
$59.95
A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams
Topeak MTX Dual-Side Frame
$42.95
Boost the carrying capacity of your Topeak MTX BeamRack (sold separately) with their Dual-Side Frame. It enables you to attach panniers and other Topeak MTX bags to your BeamRack.
Page 1 of 4 Next page