Filter By:
- Parts & Accessories (53)
- Combos/Systems (76)
- Headlights (126)
- Taillights (95)
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Lighting
- Velo Wireless computer with AMPP 100 headlight and ViZ 100 rear light
- Waterproof IPX7: Operates even after 30 minutes of submersion in a depth of 1 meter
- 3x brighter than EL135
- OptiCube lens technology
- Low battery indicator
- Mode memory function
- Two light modes (Constant / Flashing)
- Replaceable bracket spacer
- FlexTight bracket
- Runtime: Constant: 30 hours (50 lumens) (Approx.) Flashing: 250 hours (50 lumens)
- Battery type: 2 x AA alkaline battery
- Waterproof IPX7: Operates even after 30 minutes of submersion in a depth of 1 meter
- 3x brighter than EL135
- OptiCube lens technology
- Low battery indicator
- Mode memory function
- Two light modes (Constant / Flashing)
- Replaceable bracket spacer
- FlexTight bracket
- Runtime : Constant: 30 hours (50 lumens) (Approx.) Flashing: 250 hours (50 lumens)
- Battery type : 2 x AA alkaline battery
- 5 ultra bright LEDs
- Design offers high visibility
- 3 modes: rapid, flashing, constant
- Run time: R - 60h to 120h, F - 40h to 120h
- 2x AAA batteries included
- FlexTight bracket
- Battery tail lamp with reflector for rear rack
- Compatible with 50mm, 80mm and 19mm (center mount)
- Waterproof construct IPX4
- Built-in wide angle reflectors
- Meets StVZO, RKF and Danish lamp standards
- Meets StVZO Z, BS, UN IVA, UN IA and CPSC reflector standards
- Low battery indicator
- Tool-free battery replacement
$3.00
Updated and more secure clothing clip for mounting CatEye safety lights.
$3.59
Replacement lithium ion CR2032 batteries for use in the Femto LED lights.
SPEC: 700 mAh, 3.6V.
$3.59
Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.
$3.59
Replacement mounting strap for the Zecto and Femto LED lights.
$4.99
- Attaches to rear racks
- Compatible with: Blinky 3,5,7 and Superflash
- 25mm between each of the top horizontal holes (center to center)
- Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
$4.99
$10.00
50% Off
Increase your visibility by using the Stix Arm/Leg Band mount to attach your Specialized Stix light to arms and legs.
- Includes rigid mount and fabric band for comfortable and secure hold.
- Wraps around ankle to keep pant legs away from chainrings.
- Increases visibility and versatility of Stix lights, both on an off the bike.
$5.00
Stick a Stix on it. This fabric clip mount makes it a cinch to clip your Specialized Stix to a bag, jacket, or jersey for on-the-go visibility.
- Stainless steel spring clip for secure mounting.
$5.00
You really can put a Specialized Stix headlight almost anywhere. This headlight mount is designed to cleanly integrate into the headset of the bike and maintain a clean look with the Stix positioned just under the stem.
- Positions Stix headlight just under the stem in front of the head tube for a super-clean, integrated look.
- Interlocking system between plastic mount and aluminum spacer allows the light and mount to quickly be removed from the bike.
- Works with 1-1/8th Aheadset-style headsets and custom 10mm thickness spacer.
$5.09
- Replacement mounting straps for Sunlite lights
- Choose specific model to fit your light
$5.99
- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights
- Fits 25.4 – 31.8mm handlebars
$6.00
The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post.
- Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot.
- UV proof rubber strap
- Compatible with every PDW tail light except Asteroid and Fenderbot
$6.00
Grab a set of Portland Design Works tail light brackets to mount your lights on seat posts and seat stays.
- Seat post and seat stay brackets
- Rubber shims included for a custom fit
- Compatible with all PDW tail lights except Asteroid and Fenderbot
$6.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works.
- Compatible with all PDW rear lights except the Asteroid and Fenderbot
- Horizontal holes are 50mm apart to fit European rack standards
- Vertical holes are 18mm apart to fit most reflector mounts
$6.00
Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack.
- Vertical CPSC hole pattern.
- This mount can attach to the Horizontal Din hole pattern.
- Specialized single hole pattern for the Pizza Rack.
- Mounts Stix light horizontally.
- Includes all mounting hardware.
$6.99
- Compatible with seatpost diameter 20mm-36mm
- Adjustable light angle
- Easy on/easy off design makes for quick mounting and removal
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light
$6.99
- Simplistic safety light designed to be seen
- Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars
- 3 modes including 1 steady and 2 flashing modes
- Powered by 2 CR2032 batteries
- Lumens: 12
$6.99
- Simplistic safety light designed to be seen
- Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars
- 3 modes including 1 steady and 2 flashing modes
- Powered by 2 CR2032 batteries
- Lumens: 6
$7.39
Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.
$7.99
-Mounts easily to front racks with threaded M5 mounts
-Allows for unobstructed light positioning
-22.2mm clamping diameter
$8.39
Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.
$8.39
Put it on your handlebars, put it on your fork leg, put it anywhere—Sunlite's Griplite goes everywhere! This powerful little light has 2 LEDs and runs for a whopping 100 hours! It has steady and flashing modes and is housed in a water-resistant body.
$8.39
• 2 bright Nichia LEDs
• Uses 2 CR 2032 lithium batteries (included)
• 100 hour run time
• 3 modes: 2 flashing and 1 steady
• Water-resistant silicone body
$8.39
• 2 bright Red LEDs
• Includes 2 (CR 2032) lithium batteries
• 100 hour run time
• 3 mode (2 flashing modes & steady mode)
• Water resistant silicone body
$8.99
ABS Adapter that allows you to fit Trace and TraceR lights to action camera brackets such as GoPro, AEE, Sony and many others, giving you a flexible mounting solution.
Page 1 of 12
Next page